Cost to make: $16. Comparable retail cost: $50-80. Savings: around $34-64 (300-500%)
Use: As a bug net/tent when cowboy camping or sleeping under a tarp
Will I use it?: Are there mosquitos or black flies? Absolutely.
Onto my third piece of ultralight gear: a tiny bug tent designed to fit over the head/torso only. Cowboy camping or camping under a tarp? Are mosquito’s trying to eat you alive? No worries, use this amazing and tiny bug tent and turn the torture tables on those mosquitos…
There are a few bug tents and bivies out there. Most are full body. Two or three on the market are head and torso only. They tend to be fairly expensive considering most of them are made with no-seeum netting which costs less than $10 per yard, while the tents retail for anywhere from $50 to $80 each. Lame.
This tiny tent is made with 1 yard of mesh no-seeum netting. Grosgrain ribbon, very thin 1.25 mm cord, and micro line loc adjusters comprise the tie-outs. An adjustable trekking pole serves as the tent pole.
The design is based on the mesh portion of Six Moon Designs Meteor Bivy, but scaled down in order to construct the tent with 1 yard of netting. Much of the cost is in the guy lines. Two of the 4 lines can and probably will be removed and replaced with stakes in order to get better ground contact and keep those pesky bugs from sneaking under.
The urban apartment test environment bodes well for outdoor successes. The tent should provide amazing bug shielding at a minimum size and cost.
Overall – third piece of ultralight gear making was a success!
Next on the horizon: 2 person tarp, bivy bag, and solo tarp/poncho…
Cost to make: $6. Comparable retail cost: about $10 (not really a comparable retail product though, it’s mostly DIY or a flat ground cloth). Savings: around $4 (40%)
Use: As a ground cloth when cowboy camping or when sleeping under a tarp
Will I use it?: Yes! Especially now that I have a Thermarest NeoAir for super plush sleeping
So here’s my second piece of lightweight gear: a Tyvek ground cloth complete with toe and head splash guards.
You might be wondering what’s up with tyvek…Yes, it’s a building material. And it also just so happens to also be a perfect lightweight and durable material for ultralight gear. According to the ZPacks website (another great ultralight gear maker): “Tyvek ‘Home Wrap’ is an ideal material for ground sheets. It is waterproof, and very abrasion and puncture resistant. Tyvek is stiff, and foldable like thick paper. It will not bunch up or slide around under you like other fabrics. It can be cut with regular scissors, and the edges do not fray.”
Most thru hikers use a Tyvek ground cloth. It’s cheap, light, durable, waterproof, easy to find, and perfect for throwing under your sleeping pad if you’re cowboy camping (look, Ma! No tent!) or using a tarp (aka a shelter without a bottom). Some of the extreme ultralight folks out there use polycro as a groundcloth instead of Tyvek, a material that’s super super light and more like saran wrap. I decided to go with Tyvek because I just got a new sleeping pad – a luxurious and plush Thermarest NeoAir because I toss and turn and side sleep and need more than just a thin foam pad. However, NeoAirs are rumored to puncture fairly easily, so I wanted a groundcloth that would give me durability and substance – a good buffer between my delicate sleeping pad and any sticks or rocks – while still being lightweight. Hence Tyvek.
Why the toe and head splash guards? No splashing – duh! Well, you can imagine camping under a tarp in a thunderstorm. Sure, a simple A-frame simple tarp will keep you dry and cozy from overhead rain, but what if it’s windy? And what if the rain drops are so huge that they’re splashing back up from underneath the tarp edges? That A-frame allows a lot of room for drops to snear near your bag. Solution: splash guards! The splash guards at the toe and head will protect from water splashing back, and the construction means that the ground cloth creates a bathtub shape along the sides, further protecting you and your fragile down bag from any rogue water droplets. Less wet down means no soggy bag and less dry time. Last year on the PCT Jared and I got caught in a few doozy thunderstorms in the Sierras. If we’d had a tarp, we surely would have needed protection from monster raindrop backsplash and would have made good use of this ground cloth.
The ground cloth is made with two pieces of tyvek, each about 34″ wide. The two pieces are sewn together and seam sealed. Then the edges are folded over, envelope style, to create the toe and head splash guards. The corners are rounded to reduce excess material and weight. Attachment points for the toe guard are reinforced with extra fabric and stitching to prevent tearing. All seams are sealed with SeamSure, a simple water based seam sealer.
So far, the ground cloth is faring well. I have yet to put it to the test and use it outside, but urban apartment camping tests bode well for future successes. It should give me just the abrasion and dirt protection me and my sleeping pad need. And it should also protect my down bag from any splashing (especially under those tarps that I have in the works).
Overall – second ultralight gear making was a success! Next time around, I’ll add a few inches to overall length (it’s just barely long enough now…a few more inches would reduce stress on attachment points), but will otherwise keep the design consistent.
Next on the horizon: tiny bug mesh tent, 2 person tarp, bivy bag, and solo tarp/poncho…
Cost to make: $10. Comparable retail cost: $20-$30. Savings: about $10-$20 (100-200%)
Use: Dry bag for quilt, clothes, or small sleeping bag.
Will I use it?: Yes, as soon as I make myself a quilt! Right now my sleeping bag is too big to fit inside…
In case you haven’t figured it out yet, this post is about gear making (Aka MYOG, or Make Your Own Gear). I confess – I haven’t been in the mountains much lately. Instead of hitting the hills, I’ve been climbing indoors at Vertical World, running (including a hilly 5k in Interlaken Park), and making gear for my next adventure! Yes, I’ve officially caught the ultralight bug.
This is my first piece of ultralight gear – a Cuben fiber roll-top dry sack with the lightest possible cuben fiber out there (at 0.33 oz/sqyd).
So what is cuben fiber? It’s an amazing super light fabric used in ultralight gear making, among other things. “Cuben Fiber is a high-performance, non-woven, rip-stop, composite laminate developed in the 1990s by a nuclear weapons physicist and an aerospace composite engineer. Originally designed for use in world-class sailing, it is ideal for certain applications in lightweight and ultralight outdoor gear due to its unmatched strength-to-weight ratio”, according to lightweight gear makers at Hyperlight Mountain Gear. “Technically speaking, Cuben fiber is a laminated fabric made using patented technologies with unidirectional prepregnated tapes of in-line plasma treated fibers that are spread into mono-filament level films. In more simple terms, Cuben fiber is made by sandwiching Spectra or Dyneema polyethylene fiber filaments a thousandth of an inch thick, in various arrangements between thin outer layers of polyester film. The “sandwich” is then melded together in a high-pressure autoclave. Cuben fiber is lightweight, highly durable, and is 50-70% lighter than Kevlar, four times stronger than Kevlar, and allows flex without losing strength. It is also less than half the weight of silnylon, has low specific gravity (floats on water), high chemical resistance, excellent UV resistance and is 100% waterproof.”
In short – ultralight, ultra strong, and waterproof. Perfect for tents, tarps, dry bags, stuff sacks, etc. It comes in weights ranging from 0.33 oz/sqyd-1.43 oz/sqyd plus as a hybrid with other materials.
This dry bag is constructed with the lightest possible cuben – 0.33 oz/sqyd. Most of the seams are taped with double sided cuben tape. I folded the bottom and sewed the corners in order to get a box like shape, then taped the outside with single sided cuben tape for waterproofing. The top edge is reinforced with more 0.33 oz/sqyd cuben rolled/folded over, then taped with single sided cuben tape on which a buckle is attached for closure.
It works well and will hold a small quilt. Because it is so likely to puncture, I consider it highly water resistant as opposed to fully waterproof. In fact, upon testing (filling with water!), there were a few teeny tiny holes through which water seeped over time. It should function well inside a pack in rainy conditions, but probably not fully submerged in a river (which I don’t intend to do).
So overall – first ultralight gear making was a success! Next on the horizon: tiny bug mesh tent, tyvek ground cloth with toe splash guard, 2 person tarp, and tarp/poncho…