MYOG No. 3 – Tiny Torso Bug Tent

Tiny bug tent viewed from above. Trekking pole functions as tent pole
Tiny bug tent viewed from above. Trekking pole functions as tent pole

Gear: Tiny Torso Bug Tent.

Weight: 35 grams/1.3 ounces

Dimensions: 54″ wide, 18″ tall, covers an apx. 3′ head-torso length section

Cost to make: $16. Comparable retail cost: $50-80. Savings: around $34-64 (300-500%)

Use: As a bug net/tent when cowboy camping or sleeping under a tarp

Will I use it?: Are there mosquitos or black flies? Absolutely.

Tie out
Tie out

Onto my third piece of ultralight gear: a tiny bug tent designed to fit over the head/torso only. Cowboy camping or camping under a tarp? Are mosquito’s trying to eat you alive? No worries, use this amazing and tiny bug tent and turn the torture tables on those mosquitos…

Top of tent
Top of tent

There are a few bug tents and bivies out there. Most are full body. Two or three on the market are head and torso only. They tend to be fairly expensive considering most of them are made with no-seeum netting which costs less than $10 per yard, while the tents retail for anywhere from $50 to $80 each. Lame.

This tiny tent is made with 1 yard of mesh no-seeum netting. Grosgrain ribbon, very thin 1.25 mm cord, and micro line loc adjusters comprise the tie-outs. An adjustable trekking pole serves as the tent pole.

Base of pole attachment
Base of pole attachment

The design is based on the mesh portion of Six Moon Designs Meteor Bivy, but scaled down in order to construct the tent with 1 yard of netting. Much of the cost is in the guy lines. Two of the 4 lines can and probably will be removed and replaced with stakes in order to get better ground contact and keep those pesky bugs from sneaking under.

The urban apartment test environment bodes well for outdoor successes. The tent should provide amazing bug shielding at a minimum size and cost.

Overall – third piece of ultralight gear making was a success!

Next on the horizon: 2 person tarp, bivy bag, and solo tarp/poncho…

Mesh tent success!
Mesh tent success!
Advertisements

MYOG No. 2 – Tyvek Ground Cloth

Tyvek ground cloth with splash guards in an urban camping environment
Tyvek ground cloth with splash guards in an urban camping environment, complete with Thermarest and sleeping bag

Gear: Tyvek Ground Cloth With Toe and Head Splash Guards.

Weight: 97 grams/3.4 ounces

Dimensions: Apx 34″x68″ flat (with splash guards 34″x104″)

Cost to make: $6. Comparable retail cost: about $10 (not really a comparable retail product though, it’s mostly DIY or a flat ground cloth). Savings: around $4 (40%)

Use: As a ground cloth when cowboy camping or when sleeping under a tarp

Will I use it?: Yes! Especially now that I have a Thermarest NeoAir for super plush sleeping

View from the head-end of the ground cloth
View from the head-end of the ground cloth

So here’s my second piece of lightweight gear: a Tyvek ground cloth complete with toe and head splash guards.

You might be wondering what’s up with tyvek…Yes, it’s a building material. And it also just so happens to also be a perfect lightweight and durable material for ultralight gear. According to the ZPacks website (another great ultralight gear maker): “Tyvek ‘Home Wrap’ is an ideal material for ground sheets. It is waterproof, and very abrasion and puncture resistant. Tyvek is stiff, and foldable like thick paper. It will not bunch up or slide around under you like other fabrics. It can be cut with regular scissors, and the edges do not fray.”

Most thru hikers use a Tyvek ground cloth. It’s cheap, light, durable, waterproof, easy to find, and perfect for throwing under your sleeping pad if you’re cowboy camping (look, Ma! No tent!) or using a tarp (aka a shelter without a bottom). Some of the extreme ultralight folks out there use polycro as a groundcloth instead of Tyvek, a material that’s super super light and more like saran wrap. I decided to go with Tyvek because I just got a new sleeping pad – a luxurious and plush Thermarest NeoAir because I toss and turn and side sleep and need more than just a thin foam pad. However, NeoAirs are rumored to puncture fairly easily, so I wanted a groundcloth that would give me durability and substance – a good buffer between my delicate sleeping pad and any sticks or rocks – while still being lightweight. Hence Tyvek.

Nice, generous toe splash protection
Nice, generous toe splash protection

Why the toe and head splash guards? No splashing – duh! Well, you can imagine camping under a tarp in a thunderstorm. Sure, a simple A-frame simple tarp will keep you dry and cozy from overhead rain, but what if it’s windy? And what if the rain drops are so huge that they’re splashing back up from underneath the tarp edges? That A-frame allows a lot of room for drops to snear near your bag. Solution: splash guards! The splash guards at the toe and head will protect from water splashing back, and the construction means that the ground cloth creates a bathtub shape along the sides, further protecting you and your fragile down bag from any rogue water droplets. Less wet down means no soggy bag and less dry time. Last year on the PCT Jared and I got caught in a few doozy thunderstorms in the Sierras. If we’d had a tarp, we surely would have needed protection from monster raindrop backsplash and would have made good use of this ground cloth.

Smaller head splash guard
Smaller head splash guard

The ground cloth is made with two pieces of tyvek, each about 34″ wide. The two pieces are sewn together and seam sealed. Then the edges are folded over, envelope style, to create the toe and head splash guards. The corners are rounded to reduce excess material and weight. Attachment points for the toe guard are reinforced with extra fabric and stitching to prevent tearing. All seams are sealed with SeamSure, a simple water based seam sealer.

So far, the ground cloth is faring well. I have yet to put it to the test and use it outside, but urban apartment camping tests bode well for future successes. It should give me just the abrasion and dirt protection me and my sleeping pad need. And it should also protect my down bag from any splashing (especially under those tarps that I have in the works).

Overall – second ultralight gear making was a success! Next time around, I’ll add a few inches to overall length (it’s just barely long enough now…a few more inches would reduce stress on attachment points), but will otherwise keep the design consistent.

Next on the horizon: tiny bug mesh tent, 2 person tarp, bivy bag, and solo tarp/poncho…

Attachment point seam reinforcements
Attachment point seam reinforcements

First ultralight gear made: dry bag!

Ultralight cuben fiber dry sack!
Ultralight cuben fiber dry sack weighing in at a teeny weeny 10 grams

Gear: 8-Liter 0.33 oz/sqyd Cuben Fiber Roll-Top Dry Sack.

Weight: 10 grams.

Dimensions: 10″ x 20″

Cost to make: $10. Comparable retail cost: $20-$30. Savings: about $10-$20 (100-200%)

Use: Dry bag for quilt, clothes, or small sleeping bag.

Will I use it?: Yes, as soon as I make myself a quilt! Right now my sleeping bag is too big to fit inside…

Taped seams
Taped seams

In case you haven’t figured it out yet, this post is about gear making (Aka MYOG, or Make Your Own Gear). I confess – I haven’t been in the mountains much lately. Instead of hitting the hills, I’ve been climbing indoors at Vertical World, running (including a hilly 5k in Interlaken Park), and making gear for my next adventure! Yes, I’ve officially caught the ultralight bug.

This is my first piece of ultralight gear – a Cuben fiber roll-top dry sack with the lightest possible cuben fiber out there (at 0.33 oz/sqyd).

So what is cuben fiber? It’s an amazing super light fabric used in ultralight gear making, among other things. “Cuben Fiber is a high-performance, non-woven, rip-stop, composite laminate developed in the 1990s by a nuclear weapons physicist and an aerospace composite engineer.  Originally designed for use in world-class sailing, it is ideal for certain applications in lightweight and ultralight outdoor gear due to its unmatched strength-to-weight ratio”, according to lightweight gear makers at Hyperlight Mountain Gear. “Technically speaking, Cuben fiber is a laminated fabric made using patented technologies with unidirectional prepregnated tapes of in-line plasma treated fibers that are spread into mono-filament level films.  In more simple terms, Cuben fiber is made by sandwiching Spectra or Dyneema polyethylene fiber filaments a thousandth of an inch thick, in various arrangements between thin outer layers of polyester film.  The “sandwich” is then melded together in a high-pressure autoclave. Cuben fiber is lightweight, highly durable, and is 50-70% lighter than Kevlar, four times stronger than Kevlar, and allows flex without losing strength.  It is also less than half the weight of silnylon, has low specific gravity (floats on water), high chemical resistance, excellent UV resistance and is 100% waterproof.”

Square sewn and taped bottom construction
Square sewn and taped bottom construction

In short – ultralight, ultra strong, and waterproof. Perfect for tents, tarps, dry bags, stuff sacks, etc. It comes in weights ranging from 0.33 oz/sqyd-1.43 oz/sqyd plus as a hybrid with other materials.

This dry bag is constructed with the lightest possible cuben – 0.33 oz/sqyd. Most of the seams are taped with double sided cuben tape. I folded the bottom and sewed the corners in order to get a box like shape, then taped the outside with single sided cuben tape for waterproofing. The top edge is reinforced with more 0.33 oz/sqyd cuben rolled/folded over, then taped with single sided cuben tape on which a buckle is attached for closure.

It works well and will hold a small quilt. Because it is so likely to puncture, I consider it highly water resistant as opposed to fully waterproof. In fact, upon testing (filling with water!), there were a few teeny tiny holes through which water seeped over time. It should function well inside a pack in rainy conditions, but probably not fully submerged in a river (which I don’t intend to do).

So overall – first ultralight gear making was a success! Next on the horizon: tiny bug mesh tent, tyvek ground cloth with toe splash guard, 2 person tarp, and tarp/poncho…

Success
Success

Gear!

So the most exciting thing about getting ready for our PCT trip has been gear. Lots of gear. Buying new, fun gear. Squishing things into stuff sacks, sporting lots of patagucci, climbing in and out of sleeping bags, testing out the new water filter, packing the packs, firing up the camp stove, marveling at lightweight rain gear, etc.

Some of our favorite gear that we have to tell you about:

JEAN

Pack: ULA Circuit Pack

I bought this a few years ago while I was hiking the Long Trail in VT and it has served me well. At the time, another hiker told me this pack was all the rage on the PCT. Little did I know I would be taking it there myself. Super comfortable. Super lightweight. Specs: 39 oz, 68 L (4,200 cu in) capacity

Circuit-2

Camp jacket: Feathered friends Daybreak

I’m excited for this camp jacket. It’s 900+ fill down, weighs next to nothing, also made in Seattle! is really really warm and looks pretty sweet. Specs: 8.5 oz

featheredfriends_wave_whoodeddaybreak_6

Sleeping bag: Feathered Friends Egret UL 20

This bag is amazing. And sexy. And one of the best sleeping bags out there (according to the sales guy at the store, but it’s a legit statement). Made in Seattle! So lightweight. Compresses down really tiny. Continuous baffles mean warmer is possible on those cool nights. 900+ fill down amazes me.  Specs: (small bag for 5’3″ or shorter) 27 oz

featheredfriends_azure_egret_1

JARED

Pack:

My Elemental Horizons Aquilo.  Never before have I been so psyched about a piece of gear… 

Matthew at Elemental Horizons is awesome and built this bag to order for me after I ordered it about 5 weeks ago.  Super thoughtful attention to detail, super light (2.1 pounds), and super comfortable.  Carries a load like a champ too – the other day Jean and I were working out on the Howe St. stairs here in Seattle.  She asked how much weight I was carrying and I guessed somewhere less than 10 – the real number was 25.

Sleeping bag:  My Western Mountaineering Caribou MF.  It’s been with me for… almost 9 years now, which is crazy to think about.  It’s warm, compact, and very light – less than 2 lbs.  It’s been on the Blue Ridge mountains, the White Mountains, the Cascades, the Diablo range, and a bunch of other random camp sites.  Time to add the Sierras to the list…

Camp jacket: Feathered friends daybreak.

a 9 oz jacket that keeps me warm all the time.  this winter when it was 25 degrees I would routinely wear this jacket over a t-shirt and I was plenty warm – too hot some times when I was walking.  Pretty awesome.

BOTH/SHARED

Water filter: Platypus gravity works

Originally we were going to use Aquamira drops instead of getting a filter. Pro’s being: lightweight and inexpensive. But then we did the math. In order to treat or water for 3 months of use at 3L/day minimum, it was going to be over $200. And so an easy to use filter with solid capacity just made way more sense. Platypus is made in Seattle! And this is one of the best filters on the market right now. It’s amazingly easy to use. And pretty lightweight. Specs: 11 oz, 4 L

GravityWorks_4-0L_Filter

Sleeping pads: Gossamer Gear NightLight Torso pads

We’re both carrying two of these a piece. Reasonably priced and super super lightweight. We have the option of sending one home to shave some weight if needed too. Specs: 4.7 oz each, 19 x 29.75 in

torso-big

Tent: Big Agnes

Umbrella: GoLite Chrome Dome

The chrome dome is ultra light and serves to keep rain and sun away. Key in the dessert and Sierras. Specs: 8 oz

GetImage (1)

Stove: Soto Microregulator OD-1R

Our original thought was to use a homemade tin can alcohol stove, but after learning about the alcohol stove bans in dry CA and some of the explosive possibilities of alcohol stoves, we opted for a canister stove. And it’s really great. We’re digging it. This one is really tiny! And has had some great reviews and backpacking awards. It is also reasonably priced at $60. Specs: 2.6 oz

OD-1R-1M

Solar charger: Suntastics sCharger-5

Solar charger to charge anything by USB. It’s small (looks like a small book), folds up, charges quickly, and is lightweight. And is made in the US. We’re bringing a laptop (Jared is ‘working’ while hiking), we’ll be able to charge our phones (good for emergency contact and location), and headlamp for starters.

scharger-5-new-s-700x450

And a link to our complete gear spreadsheet might be HERE soon